The TRENDnet 14 Dbi Wifi Ac867 Outdoor Poe Preconfigured Point-To-Point Bridge Kit (TEW-840APBO2K) from DJDeals.com is a complete, ready-to-deploy wireless bridge solution for connecting two buildings, structures, or network segments wirelessly. The kit includes two TEW-840APBO units that are preconfigured and pre-encrypted at the factory — mount one unit at each end, connect the included 24V passive PoE injectors, and the 5GHz AC867 bridge link is established automatically without any configuration. Both units carry 14 dBi internal directional patch antennas for focused long-range transmission and IP56-rated housing for reliable year-round outdoor operation. NDAA/TAA compliance and a 3-year warranty make this kit a dependable solution for permanent outdoor bridge installations.
TRENDnet 14 Dbi Wifi Ac867 Outdoor Poe Preconfigured Point-To-Point Bridge Kit (TEW-840APBO2K) Features:
- Preconfigured Out of the Box. Both TEW-840APBO units are factory-preconfigured and pre-encrypted — establish a working wireless bridge link without touching a configuration interface.
- 5GHz AC867 MU-MIMO Performance. Each unit delivers up to 867Mbps on 5GHz using 802.11ac Wave 2 with 2×2 MU-MIMO for a high-throughput point-to-point link.
- 14 dBi Directional Patch Antennas. Both units include built-in 14 dBi internal directional patch antennas focused for maximum range and minimal interference in the bridge direction.
- Two 24V Passive PoE Injectors Included. Each unit is powered via its own included 24V passive PoE injector, delivering power and data over a single cable up to 60m per end.
- IP56 Weather-Rated Housing. Both units are fully sealed against water jets and dust ingress and operate from -22°F to 140°F for reliable year-round outdoor deployment.
- Reconfigurable to Other Modes. Factory bridge config can be changed if needed — each unit supports Access Point, WDS Bridge, WDS AP, WDS Station, and Client Bridge modes.
- Complete Mounting Hardware Included. Pole and wall mount hardware included for both units — everything needed for a professional outdoor installation is in the box.
- NDAA/TAA Compliant. Meets federal procurement requirements; backed by a 3-year warranty.
TRENDnet 14 Dbi Wifi Ac867 Outdoor Poe Preconfigured Point-To-Point Bridge Kit (TEW-840APBO2K) Specifications:
- Contents: 2 x TEW-840APBO units (preconfigured) + 2 x 24V passive PoE injectors + 2 x sets of mounting hardware
- Wireless Standard (per unit): IEEE 802.11a/n/ac Wave 2 (5GHz); MU-MIMO 2×2:2
- Maximum Wireless Speed (per unit): Up to 867Mbps (5GHz 802.11ac)
- Antenna (per unit): 14 dBi internal directional patch
- TX Power (Max, per unit): 802.11ac: 22 dBm; 802.11a: 23 dBm
- Ports (per unit): 1 x Gigabit PoE-in (LAN1); 1 x Gigabit (LAN2)
- PoE Input (per unit): 24V DC passive PoE; cable run up to 60m (197 ft.)
- Power Consumption (per unit): Max 9.5W
- Weather Rating: IP56 (both units)
- Operating Temperature: -22°–60°C (-7.6°–140°F)
- Dimensions (per unit): 185 x 100 x 35mm (7.3 x 3.9 x 1.4 in.)
- Certifications: FCC; NDAA/TAA compliant; Warranty: 3 years
TRENDnet 14 Dbi Wifi Ac867 Outdoor Poe Preconfigured Point-To-Point Bridge Kit (TEW-840APBO2K) Documents:
No manufacturer documentation is available for this product.
