The reProducer Audio Labs Epic 5 Nearfield Studio Monitor (Pair) (REP-EPIC5) from DJDeals.com were designed and built with infatuation in every detail. If every element fulfills its task 100% then there is no need for compromise! Obsession with detail means using our own high-frequency driver, passive radiator, as well as the amplifier and the housing. And so nothing is left to chance, we designed our own feet too! Control down to the depth of Hertz. All connections and adjustments. Position your reProducer Audio Labs Epic 5 Nearfield Studio Monitor where you need it.
From the very beginning, our development team opted for purely analog signal routing with high-quality components. Therefore, signal transmission takes place directly and is unadulterated, and DSP compensation is rendered completely unnecessary.
The reProducer Audio Labs Epic 5 Nearfield Studio Monitor highlights our obsessive nature to create products that will exceed our customer’s needs. In this case, our goal was to create a reasonably priced near-field studio monitor, with great attention to detail, carefully balanced, technically up-to-date, with no design compromises in an aesthetically pleasing package.
For even sound reproduction, we focused on linear signal response and its temporal and harmonic aspects. In and out swing behavior is balanced across the entire bandwidth. Equal material properties of the sound-forming components result in a homogeneous sound, in which all components perform harmoniously, avoiding the need for artificial DSP compensation.
As we embarked on the reProducer Audio Labs Epic 5 Nearfield Studio Monitor development journey, it quickly became clear that virtually no mass-produced components could be used for the implementation of such an ambitious overall concept. After four long years of development work we have developed all the individual components as well as our own manufacturing process for the reProducer Audio Labs Epic 5 Nearfield Studio Monitor!
The reProducer Audio Labs Epic 5 Nearfield Studio Monitor provides a harmonious home to its perfectly balanced components — tweeters, woofers, passive radiators, and amplifier electronics. It comes with a very elaborate, compact housing that’s optimized for stiffness. The wavefront timing of components is mechanically aligned, so they oscillate in phase and are phase-locked in the relevant frequency range. Low noise guarantees a very high dynamic range decaying signals, such as reverb tails or fading guitar strings won’t get lost in the noise floor.
The philosophy that drives our development process strives uncompromisingly to achieve:
• Flat frequency response
• Extended frequency range
• Fast Transient response
• High dynamic range
• Perfect time-alignment
• Excellent directivity
• All in-phase design
• Flat phase response
• Low distortion
• No dynamic manipulation
• No psychoacoustic tricks
• No air-flow noise
• Very low noise
• Pure analog processing
reProducer Audio Labs Epic 5 Nearfield Studio Monitor Technical Info
Frequency Response:
56-33.000 Hz ±3dB
Frequency Response:
45-38.000 Hz ± 10dB
Amplifier Power:
2 x75W RMS, 2 x150W Peak
Amplifier Technology:
Class D, 115dB Dynamic Range, High current and Damping, Response up to 100kHz, very low Noise
Max. Sound Pressure (pair, 1m):
109 dB(C) SPL
Power Supply:
Universal 100-240VAC, 50/60Hz
Woofer:
5.25″-own design for high transient & low resonance
Tweeter:
1″- own design for high transient & wide response
Crossover:
2kHz, 24dB/Octave
Input Impedance balanced (XLR):
12kOhm
Input Impedance unbalanced (RCA):
3.3kOhm
Input Sensitivity balanced:
+4 dBu
Input Sensitivity unbalanced:
-10 dBV
Room Correction High:
± 5 dB in 1 dB Steps above 2.5kHz
Room Correction Low:
± 5 dB in 1 dB Steps below 250Hz
Dimensions without Spikes:
270 x190 x240 mm
Dimensions with Spikes:
310 x190 x240 mm
Weight per Unit:
12lbs
Dimensions with Case:
19 x14 x14 in.
Weight with Case (pair):
36lbs