The Ashly nX3.04 Audio Power Amplifier 4-Channel x 4000 Watts (NX3.04) from DJDeals.com use state of the art, light weight, high power, high efficiency switching technology developed through years of design and field testing. nX amplifiers are available in three series, designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers as well as schools, store fronts,and worship spaces. Available as three separate amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).
Class-D Switching Amplifier Technology.
NX features a switch-mode power supply which automatically detects 120VAC or 240VAC operation and makes NX one of the lightest in its class.
Multi-Mode Operation.
Selectable Outputs on each channel allow you to choose the desired output mode. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you’re set to go.
Energy Efficiency.
NX has power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable). Multiple Internal Power Supplies. NX provides increased channel separation and reliability.
Please Note: All Ashly nX, nXe & nXp amps include the appropriate power cable that corresponds with the amps power connector.
Ashly nX3.04 Audio Power Amplifier 4-Channel x 4000 Watts Features:
- Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fans
- Neutrik Combo XLR – 1/4” TRS jack plus Euroblock input connectors
- Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
- Neutrik powerCON detachable AC mains connector
- Safety/Compliance: cTUVus, CE, FCC, RoHS
Ashly nX3.04 Audio Power Amplifier 4-Channel x 4000 Watts Specifications:
- Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Damping Factor: >250 (8 Ohms load <1kHz)
- Input High Pass Filter: 80Hz 2nd order
- Distortion (SMPTE, typical): <0.5%
- Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
- Channel Separation: -75dB (dB from full output, 1kHz)
- Signal to Noise: (20Hz–20kHz, unweighted), >114dB (all 3.0x models), >111dB (all 1.5x models), >108dB (all 800x models), >105dB (all 400x models)
- Frequency Response: 20Hz–20kHz, +/-0.05dB
- Balanced Input Connector: Euroblock 3.5mm, ¼” TRS and XLR Combo jack
- Input Impedance: 10k Ohms
- Maximum Input Level: +21dBu
- Speaker Output Connector: Neutrik speakON&re;
- Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input
- Attenuators (per channel): Front panel and remote. Fully off = Mute
- Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
- Airflow: In through sides, Out through front
- Cooling: Continuously variable temperature controlled axial fan(s)
- Environmental: 32–113 deg F, (0–45 deg, C)(noncondensing)
- Unit Dimensions(all models): 19”W x 3.5”H x 16.84”D (483mm x 89mm x 428mm)
- Power Requirements (@ 50/60Hz): Nominal(Automatic Sensing SMPS) – 120VAC 240VAC, Operating Range – 70–135VAC 140–270VAC
- Power Cable Connector Requirements: 32A powerCON (Cable Included)
Warranty
- 5 Years
GTIN:0694970192072
