The ADJ RDM XS8 8-Port DMX & RDM Data Splitter (RDM800) from DJDeals.com is a compact, 1U rack-mount DMX512 and RDM data splitter designed to streamline signal distribution in theaters, concert venues, and large lighting productions. Its 5-pin XLR input receives the DMX signal and distributes it cleanly across eight isolated 5-pin XLR outputs, with one additional 5-pin XLR thru connector for daisy-chaining to additional devices. A Link Out Termination Switch and a DMX/RDM protocol switch on the rear panel give operators precise control over signal routing and termination. RDM support enables two-way communication between a lighting controller and all connected fixtures for remote addressing, configuration, and diagnostics from a single control point.
ADJ RDM XS8 8-Port DMX & RDM Data Splitter (RDM800) Features:
- 8-Way DMX and RDM Data Splitter. One 5-pin XLR input distributes signal to eight isolated 5-pin XLR outputs for clean, reliable DMX512 distribution across large lighting rigs.
- 1x 5-Pin XLR Thru Output. A dedicated thru connector allows the DMX signal to continue to additional splitters or devices downstream without signal degradation.
- RDM (Remote Device Management) Support. Two-way RDM communication enables remote fixture addressing, configuration, and monitoring directly from a compatible lighting controller.
- Link Out Termination Switch. On-board termination switch eliminates the need for an external terminator plug, simplifying the end-of-line setup and reducing loose accessories.
- DMX / RDM Protocol Switch. Rear-panel switch toggles between DMX-only and RDM operation modes to match the connected fixtures and control system.
- 1U 19-Inch Rack Mount. Slim 1U profile integrates cleanly into standard 19-inch equipment racks for permanent installation in venue racks and touring cases.
- Universal Power Supply. AC 100-240V, 50/60Hz auto-switching power supply ensures compatibility in both domestic and international touring applications.
- Low Power Consumption. Draws only 3.1W at 120V and 3.3W at 230V, making it an energy-efficient addition to any rack-mounted control system.
ADJ RDM XS8 8-Port DMX & RDM Data Splitter (RDM800) Specifications:
- Protocols: DMX-512, RDM (Remote Device Management)
- Connections: 1x 5-pin XLR input, 1x 5-pin XLR thru, 8x 5-pin XLR outputs
- Switches: Link Out Termination Switch, DMX/RDM Protocol Switch
- Form Factor: 19-inch rack mount, 1U
- Power Supply: AC 100-240V, 50/60Hz
- Power Consumption: 3.1W @ 120V; 3.3W @ 230V
- Fuse: T1.25A/250V (5.2x20mm)
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- Dimensions (LxWxH): 6″ x 19″ x 1.73″
- Weight: 4.87 lbs. (2.21 kg)
- IP Rating: IP20
- Approvals: CE, CB, UKCA, FCC, cETLus
ADJ RDM XS8 8-Port DMX & RDM Data Splitter (RDM800) Documents:
ADJ RDM XS8 8-Port DMX & RDM Data Splitter (RDM800) Owner’s Manual














