Join our Mailing List!
Follow on Twitter!
Share this page:
Tip: Click the link below the 'Add to Shopping Cart' button to get the lowest price!
SHURE M44-7 CARTRIDGE - turntablist - scratch

Shure N44-7 Stylus

  • Product Description
  • Product Video
  • Product Accessories
  • Warranty

A Shure replacement stylus will restore your Shure cartridge to its originally specified performance level. We strongly advise against the use of non-Shure styli with our cartridges. Such imitations will not perform as well as a stylus designed specifically for your Shure cartridge. Such imitations may also cause permanent damage to your records – severe mistracking can ruin a record in a single play

Tone Arm Mount

Standard 1/2 inch
Cartridge Type
Moving Magnet
Output Voltage
Typical at 1 kHz
9.5 mV RMS at 5 cm/sec peak velocity
Recommended Load
47 kilohms in parallel with 450pf
Tracking Force
Effective at stylus tip
Range: 1.5 to 3 grams
Stylus Cantilever
Shure Type S
Heat-treated aluminum alloy / tubular
1.6 mil wall thickness / 34.5 mil diameter
Diamond Stylus Tip
Polished natural gemstone: Spherical
Radius: 0.7 mil
Frequency Response
Essentially flat from 20 to 20,000 Hz
Stereo Channel Balance
Within 2 dB
Channel Separation
Typical at 1 kHz: 20 dB
Net Weight
6.7 grams
15.9 mm
There are currently no videos for this product.


Shure warrants its products to be free from defects for 1 year from the date of purchase.