The P1108-T is a weatherproof full range, wide-dispersion, two way speaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.
In a single-piece rotational molded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil.
The cabinet is equipped with 4 xM 8 brass inserts and a steel U-Bracket. The front logo is in aluminum and rotatable.The grille is in custom perforated aluminum with open-cell fibres and water repellent woven fabric backing.
P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).
FEATURES
100 W RMS
Weatherproof cabinet IP 55
Aluminum grill and stainless steel bracket
One 8″ high-output LF transducer with 1.5″ voice coil
One RCF Precision 1″ Compression Driver with 1.5″ voice coil
90 degree x60 degree constant directivity horn
2 degree x15 degree enclosure sides for cluster configurations
PTC Driver Protection
LICC (Low Impedance Compensated Crossover) network
2 metres 4 x1.5 Input cable
ACOUSTICAL SPECIFICATIONS
Frequency Response -10 dB:80 Hz ÷ 20000 Hz
Max SPL @ 1m:121 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:11
System Sensitivity:95 dB
Nominal Impedance:16 Ω
Power Handling:100 W
Peak Power Handling:400 W
Recommended Amplifier:200 W
Protections:Dynamic protection on Compression Driver
Crossover frequencies:2200 Hz
TRANSDUCERS
Compression Driver:1″ throat, 1.5″ coil diaphragm assembly
Nominal Impedance:8 Ω
Input Power Rating:20 W AES
Sensitivity:107 dB
Woofer:8″ woofer, 1.5″ voice coil
Nominal Impedance:16 Ω
Input Power Rating:100 W AES
Sensitivity:94 dB
INPUT SECTION
Input connector:4 x1.5 mm square 2 m Neoprene cable
Constant voltage transformer:70/100
Power Selection:70V/30W, 15W-100V/60W, 30W
CABINET
Cabinet Material:8 mm Polyethylene rotomolded
Hardware:4 xM8 + U-Bracket and Pair of spacers
Grille:Cus perforated aluminum grille with open-cell fiber and water repellent woven fabric backing
Color:Grey
PHYSICAL SPECIFICATIONS
Height:266/10.47 mm/inch
Width:493/19.40 mm/inch
Depth:250/9.84 mm/inch
Net Weight:12,5/27.55 kg/lbs