Continental USA Orders Ship FREE!
Always Low Prices
Shopping around is a waste of time!
Same Day Shipping
This item can ship to you immediately!
This Item is In Stock
Drop-ships direct from the manufacturer
The Rane MLM 82S features four balanced, studio grade, mono Mic/Line inputs with XLR jacks and 15 VDC phantom power. Each of the four Mic/Line inputs may be assigned to A, A+B or B Outputs. Independent Level/Gain Trim controls and Signal/Overload indicators are provided for each Mic/Line Input. The Phantom Power switch and the Mic/Line switches are located on the back of the unit. Phantom power is removed from any Input set for Line operation.
The Rane MLM 82S also features four stereo line level inputs with 12 dB of line gain. Each Stereo Line input features a recessed Mono switch with indicator and Level control. These inputs may also be used with four Mono A inputs and four Mono B inputs. You get the picture...this mixer is very versatile.
A and B Output Level controls set the master mix level independently for A and B Outputs. The mix amplifiers feature independent overload indicators. To correct any overload condition, the entire mix can be reduced and/or individual Input Levels adjusted. A and B mix Outputs each have an internal switch for padding the output signal to Mic level. The factory default is Line level.
Rane MLM 82S Features
Four balanced Mic/Line Inputs (XLR) with...
15V Phantom Power
Bi-Color Signal Present/Overload indicators
Trimless Mic Stage Preamplifiers
A / A+B / B Assign Switch
Four Balanced Stereo Line Inputs (TRS) with...
Independent Mono switch
12 dB of Line Gain
Two balanced Outputs (XLR) with...
Independent Overload indicators
Independent Level controls
Internal Pad for Mic level output
Individual Level Control Hole Plugs Included
Internal Universal Power Supply (100-240 VAC)
With features like Mic/Line A / A+B / B Assign switches, independent Stereo Line Input Mono switches and additional line gain, the MLM 82S is now one of the most versatile mixers in its class. It is perfect for installations requiring ease of use, compact size, low cost, high performance and security. Applications include, but are not limited too, hotels, churches, conference rooms, schools and rental sound systems. The studio-grade specifications of the MLM 82S allow many other applications such as sub-mixing, recording and post-production.
The Mic/Line Assign switches and independent Mono switches for each of the Stereo Line Inputs make the MLM 82S a true, dual zone capable mixer, i.e., the Outputs may be thought of as two independent zones or a single stereo zone.
MLM 82S Specifications
Parameter Specification Limit Conditions/Comments
Inputs: Type Active Balanced
Mic Jacks XLR pin 2 = (+)
Stereo Line Jacks 1/4" TRS tip=(+), ring=(–), sleeve=GND
...Input Impedance 1k / 96k Ω 1% Balanced 500+500 / 48k + 48k
Mic Gain Range off to +60 dB +/-1.5
Line Gain Range off to +20 dB +/-1.5
Equivalent Input Noise -128 dBu typ 20 kHz bandwidth, 150 Ω termination
THD & Noise 0.02% max Gain=40 dB, +4 dBu @ 1 kHz, 80 Hz BW
Freq. Response 30 Hz - 35 kHz -3 dB
Maximum Input 11.9 dBu typ Minimum Gain (3 Vrms)
@ Mic Level 38.6 dBu typ Maximum Gain (9.1 mVrms)
...Stereo Line Input Impedance 20k Ω min
Gain Range off to +12 dB +/-1
S / N Ratio 90 dB typ Unity gain, output @ +4 dBu, 22 kHz BW
.Freq. Response 10 Hz - 35 kHz -3 dB
.HD & Noise 0.007% max +4 dBu at 1 kHz, 80 kHz BW
Outputs: Type XLR Active Balanced
Impedance 200/100 Ω 1% Line level Out/Mic level Out
Gain Range Off to +6 dB +/-2
Drive Level +24 dBu 600 Ω load balanced
Phantom Power +15 VDC 4%
Output Cable Length 1500 feet typ Line-level, <50 pF per foot
Crosstalk -75 dB @ 1 kHz max re +4 dBu any channel to any channel
Unit: Agency Listing UL/cUL/CE
Power Requirement 100 to 240 VAC 10% 50/60 Hz, 7W
Unit: Construction All Steel
Size (1U) 1.75"H x 19"W x 5.3"D (4.4 cm x 48.3 cm x 13.3 cm)
Weight 4 lb (3 kg)
Shipping: Size 4.25" x 20.3" x 13.75" (11 cm x 52 cm x 35 cm)
Weight 8 lb (5 kg)
Note: 0 dBu=0.775 Vrms
Rane warrants its products to be free from defects for 1 year from the date of purchase.
FOR SUPPORT WITH YOUR PRODUCT CONTACT: