Join our Mailing List!
Follow on Twitter!
Share this page:

Ortofon OM Q-Bert DJ Turntable Cartridge

  • Product Description
  • Product Video
  • Product Accessories
  • Warranty

The Ortofon OM Q-Bert DJ Turntable Cartridge set has the QBert Concorde cartridge and stylus.

Designed together with DJ QBert for scratch and back cueing, Ortofon OM Q-Bert DJ Turntable Cartridge has a very good ability to find the groove and stay there. It uses a spherical diamond and enables a very high output (10 - 11 mV).

For easier cueing, the nose of all the Ortofon OM Q-Bert DJ Turntable Cartridge have an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.

The Ortofon OM Q-Bert DJ Turntable Cartridge is the ultimate scratching cartridge with supreme anti-skipping. With an output of 11-12mV (yes, 11-12mV), it's sound performance is unrivalled. Includes extra stylus.

Ortofon OM Q-Bert DJ Turntable Cartridge Technical Info:
Output voltage at 1000 Hz, 5cm/sec. 11 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz -
Frequency range at - 3dB 20-20.000 Hz
Frequency response 20-18.000 Hz
- 3 dB
FIM distortion at recommended
tracking force, DIN 45.542 < 1 %
Tracking ability at 315Hz at
recommended tracking force 90 µm
Compliance, dynamic, lateral 12µm/mN
Stylus type Spherical
Stylus tip radius R 18 µm
Equivalent stylus tip mass 0,6 mg
Tracking force range 3,0 g (30 mN)
Tracking force, recommended 4,0 g (40 mN)
Tracking angle 20 Degrees
Internal impedance, DC resistance 1680 Ohm
Internal inductance 920 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-400 pF
Cartridge colour, body/stylus Black / White
Cartridge weight 18,5 g
Replacement stylus unit Q.Bert

Twin package consists of (2) cartridge bodies with (2) preinstalled styli

Single Cartridge consists of (1) cartridge body and (1) preinstalled stylus

There is no warranty on any turntable cartridge or stylus.