The PRX600 Series represent an evolutionary step in the efficient use of amplifier power, super durable durability and enhanced versatility in a self-powered loudspeaker. Designed from the ground up to perform in the real world of sound reinforcement where challenging audio environments, high ambient noise levels and loud volumes are the norm, the PRX600 Series are built to last a lifetime using our reliable and trustworthy, tour-tested technology. Knowing you can rely on your system to deliver everything you need gives you the freedom to deliver your best. That's performance you can trust.
PRX612M is the most compact and versatile speaker in the PRX600 Series. It was specifically designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
Maximum SPL 134db peak
Dual purpose enclosure for both front-of house and floor monitor applications
Eight M10 fly points for horizontal or vertical suspension. One M10 pull-back point
Optimized EQ for monitor or front-of-house applications
305mm (12 in) Differential Drive dual voice-coil and magnetic gap, neodymium woofer
37.5mm (1.5 in) annular polymer diaphragm, neodymium, compression driver
1000 Watt (Dual 500 watt) Class-D, Crown amplifier
DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
Professional XLR line and 1/4" Mic/Instrument inputs, with loop through
Dual-angle tripod pole mount socket
System Type : Self-powered 12",
Maximum SPL Output : Full Range: 134 dB peak
Monitor: 133 dB peak
Frequency Range (-10 dB) : Full Range: 50 Hz - 19.5 kHz
Monitor: 51 Hz - 19.5 kHz
Frequency Response (+/-3 dB) : Full Range: 60 Hz - 17.5 kHz
Monitor: 61 Hz - 18.5 kHz
Coverage Pattern : 90 degree x 50 degree nominal
Amp Design : Crown Class D
Power Rating : 1000 W ( 2 x 500 )
Dimension (H x W x D): : 592 mm x 353 mm x 340 mm ( 23.3 in x 13.9 in x 13.4 in )
Net Weight : 15.6 kg ( 34.5 lb )
PRX612M is the most compact and versatile speaker in the PRX600 Series. It was specifically designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket tripod pole mount the PRX612M is a perfect match with a PRX618S subwoofer, offering a high performance self-powered sub/sat system.
The PRX612M is comprised of a 305 mm (12in) 265F Differential Drive woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90 Degrees by 50 Degrees horn, all driven by 1000 watt (dual 500 watt) Crown Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.
There are currently no videos for this product.
There are currently no related items for this product.
FOR SUPPORT WITH YOUR PRODUCT CONTACT: