Join our Mailing List!
Share this page:
Allen & Heath Xone:32 DJ Mixer

Allen & Heath XONE:32 DJ Mixer

  • Product Description
  • Product Video
  • Product Accessories
  • Warranty

Is it us, or do most DJ mixers look like they've been designed by middle-aged failed guitarists who think all DJs are naughty 12 year-olds?? We're a bit different. All the Xones are created by a design engineer with 20 years' DJing experience under his belt, so they're serious consoles for creative adults.

The ALLEN & HEATH XONE:32 lets the DJ push the boundaries of performance, with VCF filters, a tap-programmable low-frequency oscillator and DRS memories giving unprecedented control over the music (and the crowd).

3 Dual Stereo Channels Channels have RIAA [RCA] inputs and [TRS] stereo line level inputs, with powerful 3 band EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader.

Mic Channel XLR input with gain control and 2 band EQ, including HPF. Located on front. Routes direct to mix outputs.

Stereo Mix Outputs Balanced mix outputs on TRS with level control, plus secondary RCA pre-fade outputs for recording. The mix signal is displayed on 12 segment 3 colour peak reading bar meters.

Auxiliary Send All channels have a post fade stereo auxiliary send, so a program feed to a zone is possible. The outputs are [TRS] jacks.

3 Band EQ Powerful 3 band EQ with ‘asymmetric" characteristic; +6dB boost to preserve headroom and -26dB cut for creative mixing.

VCA Cross Fader High quality dual-rail gold-contact 45mm fader with contour control, reverse switch and led, plus bypass switch with led. CH1 is routed to X, CH3 is routed to Y, CH2 does not route through the x-fader.

Transmute Buttons A unique function which combines ‘transform" and ‘punch" DJ effects for intelligent and creative live performance. Works in conjunction with x-fader using X & Y buttons.

VCF filters with DRS Presets Choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ‘mild to wild". VCF slider. DRSTM Presets controls filter from 100Hz to 20kHz. Channels have individual VCF on buttons with blue led. VCF can also be modulated
by a low frequency oscillator with performance controls. DRSTM presets allow store and recall of 4 VCF performance settings including Channel on, VCF type, LFO on and LFO X2.

LFO with Tap Tempo Low Frequency Oscillator. Modulates VCF. Tap Tempo button allows the speed of the LFO to be set to the track. X2 switch doubles the speed. On switch activates the LFO and allows VCF slider to control depth.

Engineer / DJ's Toolbox High powered headphone output with level. Booth output on [TRS] with level. 12 segment 3 colour bar metering displays mix. Channels have 4 segment 3 colour bar meter. Channel cue / main mix fader adjusts headphone monitor to suit. Cue switches are interlocked / auto cancel.

PSU High performance internal switched-mode power supply. Universal mains input voltage.

Technical Specifications
OdBu = 0.775 Volts rms +4dBu = 1.23V rms
OdBu = 1 Volt rms -10dBV = 316mV rms
Maximum output level
MAIN OUT +24dBu into >2k ohm load
AUX/BOOTH +20dBu into >2k ohm load
REC OUT +15dBu into >10K ohm load
Internal headroom
Channels +21dB
Mix to output +23dB
Peak indicators
Turn on 12dB before clipping
MAIN / MONITOR Peak hold 12 LED 3 colour
CHANNEL Peak reading 4 LED 3 colour
Frequency response
10Hz to 40kHz +0/-1dB
Distortion THD+noise measured at +10dBu 1kHz< 0.002%
Crosstalk channel shutoff measured at 1kHz
< 90dB
Noise measured rms 22Hz to 22kHz
MIC EIN -126dB referred to 150 ohm source
Residual output noise
Mix noise
-87dBu (-87dB S/N)
Power Supply Internal switch mode power unit with auto sensing mains input.
MAINS IN socket IEC 3 pin
Power lead Country dependent with moulded mains plug supplied
AC mains 100 to 240V AC @ 50/60Hz
Consumption 30W max
Mains fuse rating 100-240V AC T500mA 20mm
Mechanical specifications
Dimensions in mm Width Height Depth
Desktop 258 (10.2") 360 (14.2") 90 (3.5")
Weight 4.5kg (9.9lb)
Conductive plastic Penny & Giles crossfader
Rack mount kit
PHONO RIAA Equalisation
RCA phono 47k ohm 2 to 100mV
LINE RCA phono >15k ohm -15 to +10dBu
MIC IN TRS jack <2K ohm -45 to -20dB
Return (link) RCA Phono 10K ohm -10dBV
MAIN OUT TRS jack Balanced <75 ohm +0dBu
AUX OUT TRS jack Impedance balanced <75 ohm -2dBu
BOOTH OUT TRS jack Impedance balanced <75 ohm -2dBu
RECORD OUT RCA Phono Unbalanced 340 ohm -10dBV
HEADPHONES Tip = L Ring = R 30 to 600 ohm 75 ohm recommended


Allen & Heath warrants its products to be free from defects for 1 year from the date of purchase.