YAMAHA P7000S AMPLIFIER
The Yamaha P7000S is a high powered professional power amp with an incredible 3200 watts RMS. Thats enough to bring down the house. The P-Series power amps are designed to work with the Yamaha Club Series speakers and speaker systems. The matched the slew-rate and dampening factor for those speakers. They've also added a new power savings feature that uses less AC power and thermal generation. the YS processing (Yamaha Speaker Processing) allows you to select one of the Club Series speakers presets. This tunes the power amp to the optimum settings.
It has both XLR and TRS inputs connections. The output connectors include a 5-way binding post with a Neutrik speakon output for solid no nonsense connections that won't come unplugged. .
When using the P7000S to power an 8-ohm speaker the power output is 700 watts rms. The amp is capable of powering speakers down to 2-ohms loads (two-channels @ 1600 watts). In bridge mode it's capable of 3200 watts @ 4-ohms.
It comes with high pass and low pass sweepable fiters so each channel can used to it's full potential, for instance you can use one channel to power a subwoofer and the other channel to power the mains. It's a very flexible system.
The power amp is contained in a sturdy 2 rack space 19" rack chassis. It's cooled using variable speed fans. The fans go faster when the amp is running loud (hotter) and producing more heat.
Yamaha says that it has a Power Bandwidth of 10Hz to 40kHz which is just fantastic, and a frequency response of 20Hz to 50kHz. The amp uses a switching power supply which is good for keeping the weight down as well as moving the noise generated up in the inaudible range. Watt per pound is really high. This makes the amp cost less to move (air, truck, or car).
Also included is short circuit protection and current limiting so you won't fry the amp or the speakers. It can sense any DC that may be going to the speaker and will shut down the power amp when this happens.
Output Specs:
- 8 ohm STEREO 700W+700W
- 4 ohm STEREO 950W+950W
- 2 ohm STEREO 1600W+1600W
- 4 ohm BRIDGE 3200W
- 8 ohm BRIDGE 2000W
Features:
- Pro-quality power in a wide range of configurations
- Perfect tuned via YS processing for use with the popular Club Series speakers
- Yamaha's EEEngine technology for efficiency
- XLR and 1/4" TRS inputs
- Neutrik Speakon, phone plug, and 5-way binding post outputs
- Sweepable high and low pass filters
- Variable speed fan
Yamaha's audio engineers have designed the new P-Series Power Amplifiers as perfect mates to the popular Club Series loudspeakers. To achieve this, they provided them with big power output that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that is tuned to the needs of these loudspeakers.
Further matching is found in Yamaha's proprietary YS Processing. Each model is equipped with this specially designed circuit that delivers output tailored to the specific response of the Club Series speakers for superior audio quality and performance. All models feature both XLR and 1/4-inch TRS inputs and Neutrik Speakon, phone plug, and 5-way binding post outputs to make connections quick and easy.
Other features include Yamaha's exclusive EEEngine technology which delivers high performance with exceptional efficiency, sweepable high and low pass filters for optimizing output to any loudspeakers, compact and durable 2U chassis, and variable speed cooling fans.
Big Output Power Delivered with Great Efficiency
The new P-Series Power Amplifiers deliver a robust amount of professionalquality power in a wide range of configurations designed to suit most any need. In a 4- ohm bridged application, the P7000S delivers 3200 watts, the P5000S delivers 2600 watts, the P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices deliver higher quality without putting a strain on funds. Further savings are realized with extremely efficient operation utilizing Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.
The Perfect Match with Your Club Speakers
The new P-Series Power Amplifiers can be used with any loudspeaker system, but if you're using our Club Series, they will provide power and performance tailored to deliver maximum performance from your system. In an 8-ohm stereo application power output per channel on the P7000S is 700 watts, the P5000S 500 watts, the P3500S 350 watts, and the P2500S 250 watts. This wide selection lets you choose the amplifier that best matches the power handling capabilities of your speaker system.
All four models are equipped with independent sweepable high and low pass filters on each channel so you can optimize output for subwoofer or full range systems to provide peak audio quality and performance from any speaker system you may be using.
Light Weight Keeps Transport and Setup Easy
Look at the specifications and you'll notice that the P2500S and P3500S are respectably light in weight making transport and setup less strenuous. What's amazing though, is the comparison in weight per watt when you look at the P5000S and P7000S. The use of a switching power supply makes these two models very lightweight while maintaining superior audio quality.
Flexible Connectivity
To provide the most flexible connectivity possible, all four models are equipped Neutrik Speakon™ output jacks, and 1/4-inch output jacks for each channel in addition to 5-way binding post. Channel inputs consist of both XLR and 1/4-inch TRS jacks.
* Speakon is the registered trademark of Neutrik AG.
Other Features
The new P-Series' industrial design delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling. Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied.
EEEngine
EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing power consumption and heat generation without degrading output power or sound quality. When power requirements are low, the system uses a highly efficient current buffer to transparently switch input power on and off as needed. As power requirements increase, an independently responding auxiliary power line supplies additional power as required. Output isn't compromised, as the auxiliary power line is driven by the power supply voltage, which maintains maximum output to the speaker load.
YS Processing
With YS Processing (Yamaha Speaker Processing), you get direct compatibility with our popular Club Series loudspeaker systems. This special circuit optimizes output from the power amplifier to match the characteristics of Club Series speaker systems delivering a signal that is precisely what the speaker requires. With the YS Processing system, extra-smooth highs and enhanced lowfrequency from your Club Series loudspeaker system is assured.
| Models | P7000S | P5000S | P3500S | P2500S | ||
| Output Power | ||||||
| 1kHz, THD+N=1% | 8Ω/STEREO | 750W+750W | 525W+525W | 390W+390W | 275W+275W | |
| 1kHz, THD+N=1% | 4Ω/STEREO | 1100W+1100W | 750W+750W | 590W+590W | 390W+390W | |
| 1kHz, THD+N=1% | 8Ω/BRIDGE | 2000W | 1500W | 1180W | 780W | |
| 20-20kHz, THD+N=0.1% | 8Ω/STEREO | 700W+700W | 500W+500W | 350W+350W | 250W+250W | |
| 20-20kHz, THD+N=0.1% | 4Ω/STEREO | 950W+950W | 700W+700W | 450W+450W | 310W+310W | |
| 20-20kHz, THD+N=0.1% | 8Ω/BRIDGE | 1900W | 1400W | 900W | 620W | |
| 1KHz, 20mS nonclip | 2Ω/STEREO | 1600W+1600W | 1300W+1300W | 1000W+1000W | 650W+650W | |
| 1KHz, 20mS nonclip | 4Ω/BRIDGE | 3200W | 2600W | 2000W | 1300W | |
| Power Bandwidth | halfpower | 10Hz-40kHz (THD+N=0.5%) | ||||
| THD+N | 20Hz-20kHz, half power | ≤0.1% | ||||
| Intermodulation Distortion | 60Hz: 7kHz, 4:1, half power | ≤0.1% | ||||
| Frequency Response | Po=1W RL=8Ω |
0dB, +0.5dB, – 1dB f=20Hz-50kHz | ||||
| Channel Separation | half power | RL=8Ω | ≥70dB 1kHz | |||
| Att.max | input 600Ω shunt | |||||
| Residual noise Att. min | DIN AUDIO | ≤70dB | ||||
| S/N ratio | DIN AUDIO | 104dB | 103dB | 102dB | 100dB | |
| Damping Factor | RL=8Ω | 1KHz | ≥350 | ≥200 | ||
| Sensitivity @8Ω | Att.max | +8dB | +6dB | +4dB | +3dB | |
| Voltage Gain | Att.max | 32.1dB | ||||
| Input Impedance | 30KΩ (balance) 15kΩ (unbalance) |
|||||
| Controls | Front Panel | POWER switch (push on/push off) attenuator (31position) x 2 |
||||
| Rear Panel | MODE switch (STEREO/BRIDGE/PARALLEL) FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2 FREQ.CONTROL (25Hz-150Hz) x 2 YAMAHA SPEAKER PROCESSING switch (ON/OFF ) |
|||||
| Connectors | Input | XLR-3-31 type/ch 1/4" TRS/ch |
||||
| Output | SPEAKON, 5way biding post, 1/4" phone/ch | |||||
| Indicators | POWER | x 1 (Green) | ||||
| PROTECTION | x 1 (Red) | |||||
| TEMP | x 1 (Red) heatsink temp ≥85oC | |||||
| YS PROCESSING | x 1 (Yellow) | |||||
| SIGNAL | x 2 (Green) | |||||
| CLIP | x 2 (Red) | |||||
| Load Protection | POWER switch on/off mute DC-fault power supply shutdown (P7000S/5000S) DC-fault power output cut (P3500S/2500S) |
|||||
| Amplifier Protection | Thermal (heatsink temp≥90oC) VI limitter (RL=1Ω) |
|||||
| Limitter Circuit | comp. :THD≥0.5% | |||||
| Cooling | Dual variable-speed fan / Single variable-speed fan | |||||
| Power Requirements | USA/120V 60Hz | |||||
| Idle Power Consumption | 35W | 35W | 30W | 25W | ||
| 1/8 Power Consumption (4Ω) | 700W | 550W | 450W | 320W | ||
| Maximum Power Consumption (4Ω) | 4000W | 3000W | 2000W | 1600W | ||
| Dimensions (W x H x D) | 18-7/8" x 3-7/16" x 17-15/16" | |||||
| Weight | 26.5 lbs | 26.5 lbs | 33.1 lbs | 30.9 lbs | ||
| 0dB=0.775V half power=1/2 output power |
||||||
