SHURE M44-7-H CARTRIDGE & TECHNICS HEADSHELL
PRE-MOUNTED ON A TECHNICS HEADSHELL!
| Skip Resistance: | ultra high |
| Output: | ultra high |
| Record Wear: | ultra low |
| Sound Emphasis: | big bass |
Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide, including The former Invisibl Skratch Piklz, X-ecutioners, and The World Famous Beat Junkies.
Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
- Combining Shure's unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
- With a 9.5 mV output, the highest on the market, the M44-7 produces very powerful, resonant sound.
SHURE M44-7-H
Simplifying the setup for turntablists worldwide, Shure recently announced the release of the M44-7-H Turntablist Cartridge pre-mounted on a Technics headshell. Scratch DJs can now virtually eliminate setup time and install this model directly onto a turntable tonearm.
The M44-7-H will debut in Shure's exclusive new line of DJ cartridge packaging. This exciting new clear-tube package is both reusable and recyclable.
--------------------------------------------------------------------------------
SHURE M44-7 / M44-7-H Specifications:
Tone Arm Mount - Standard 1/2 inch
Cartridge Type - Moving Magnet
Output Voltage - Typical at 1 kHz - 9.5 mV RMS at 5 cm/sec peak velocity
Recommended Load - 47 kilohms in parallel with 450 p
Tracking Force - Effective at stylus tip - Range: 1.5 to 3 grams
Stylus Cantilever - Shure Type S - Heat-treated aluminum alloy / tubular - 1.6 mil wall thickness / 34.5 mil diameter
Diamond Stylus Tip - Polished natural gemstone: Spherical - Radius: 0.7 mil
Frequency Response - Essentially flat from 20 to 20,000 Hz
Stereo Channel Balance - Within 2 dB Channel Separation - Typical at 1 kHz: 20 dB
Net Weight - 6.7 grams
Height - 15.9 mm
Accessories Included:
- Attached flip-down Stylus Guard
- Headshell Screwdriver (Phillips)
- Extra Set of 4 Headshell Wires (4-99)
- Stylus Cleaning Brush
- Headshell Weight (3 grams)
- User Guide
- Mounting hardware
- Stylus guard
