SHURE M44-7 CARTRIDGE - turntablist
- scratch
| Skip
Resistance: |
ultra
high |
| Output: |
ultra
high |
| Record
Wear: |
ultra
low |
| Sound
Emphasis: |
big
bass |
Revived
exactly the same as the original, this legendary battle
needle offers ultra-high skip resistance and ultra-high
output. The needle of choice for many champion DJ's
worldwide, including The former Invisibl Skratch Piklz,
X-ecutioners, and The World Famous Beat Junkies.
Engineered
for scratch DJ's and turntablists, the M44-7 is designed
not to skip under even the most demanding circumstances.
- Combining
Shure's unique wide-diameter Type S cantilever with
a tracking force of 1.5 to 3.0 grams, the M44-7's
rugged construction is highly durable, but will
not unduly wear your vinyl.
- With
a 9.5 mV output, the highest on the market, the
M44-7 produces very powerful, resonant sound.
M44-7 Features and Specifications
- Tone Arm Mount
- - Standard 1/2 inch
- Cartridge Type
- - Moving Magnet
- Output Voltage
- - Typical at 1 kHz
- - 9.5 mV RMS at 5 cm/sec peak velocity
- Recommended Load
- - 47 kilohms in parallel with 450 p
- Tracking Force
- - Effective at stylus tip
- - Range: 1.5 to 3 grams
- Stylus Cantilever
- - Shure Type S
- - Heat-treated aluminum alloy / tubular
- - 1.6 mil wall thickness / 34.5 mil diameter
- Diamond Stylus Tip
- - Polished natural gemstone: Spherical
- - Radius: 0.7 mil
- Frequency Response
- - Essentially flat from 20 to 20,000 Hz
- Stereo Channel Balance
- - Within 2 dB
|
- Channel Separation
- - Typical at 1 kHz: 20 dB
- Net Weight
- - 6.7 grams
- Height
- - 15.9 mm
- Warranty
- - Full one-year
- Accessories Included
- - Attached flip-down Stylus Guard
- - Headshell Screwdriver (Phillips)
- - Extra Set of 4 Headshell Wires (4-99)
- - Stylus Cleaning Brush
- - Headshell Weight (3 grams)
- - User Guide
- - Mounting hardware
- - Stylus guard
- Styli
- - Single with box & User Guide N44-7
- Accessory Needle
- - For wide groove / 78 RPM recordings N78S
|
